F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Antenna Cable: Service and Repair
REMOVAL
1. On 4x4 vehicles, remove the front wheel opening moulding.
1. Remove the one pushpin.
2. Remove the four screws.
3. Carefully pry the wheel opening moulding to release the nine clips.
2. Remove the inner splash shield.
1. Remove the five screws.
2. Pull the inner fender splash shield to release the three clips.
3. Disconnect the radio antenna lead in cable from the antenna base.
4. Remove the radio chassis.
5. Push the radio antenna lead in cable into the passenger compartment.