F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
-
Use isopropyl alcohol to clean and inspect the brake master cylinder bore for damage.
NOTE: If the brake master cylinder bore is damaged, the brake master cylinder must be replaced.
ASSEMBLY:
WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH
HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING
WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY,
DRINK WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
-
Use clean High-Performance DOT 3 Brake Fluid C6AZ-19542-AB or DOT 3 equivalent meeting Ford specification ESA-M6C25-A, DOT 3 to
lubricate the new piston assembly seals.
-
Carefully instal the secondary piston assembly.
-
Carefully install the primary piston assembly.
