F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
5. Disconnect the speed control core wire end from speed control servo pulley.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley.
6. Disconnect the speed control servo electrical connector.
7. Remove the speed control servo and bracket.
1
Remove the two bolts.
2
Remove the speed control servo and bracket.
8. Remove the speed control servo bracket.
1
Remove the three screws.
2
Remove the speed control servo bracket.
INSTALLATION