F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
9.
Remove accelerator cable bracket from intake manifold, then unclip cables from clip on power steering reservoir bracket. See Figure 2. Position
cable assembly aside.
10.
On 4.6L engines, proceed as follows:
^
Disconnect vapor management valve (VMV) vacuum line at rear of throttle body adapter. Refer to Figure 3.
^
Disconnect vacuum tap on right side of throttle body adapter. Refer to Figure 3.
^
Disconnect PCV hose at rear of throttle body adapter. Refer to Figure 3.
^
Remove brake booster vacuum line retainer at EGR valve. Disconnect vacuum line at throttle body adapter. See Figure 3. Position line aside.
