F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Air Cleaner Fresh Air Duct/Hose: Service and Repair
Air Cleaner Outlet Tube
REMOVAL
1. Remove the accelerator control splash shield.
1
Remove the three accelerator control splash shield bolts.
2
Remove the accelerator control splash shield.
2. Disconnect the Intake Air Temperature (IAT) sensor electrical connector.
3. Disconnect the (A) Positive Crankcase Ventilation (PCV) hose and the (B) Idle Air Control (IAC) valve inlet tube.
4. Loosen the air cleaner outlet tube hose clamp screws and remove the air cleaner outlet tube.
INSTALLATION
