F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Idle Speed/Throttle Actuator - Electronic: Service and Repair
Installation
INSTALLATION
NOTE:A new IAC valve gasket must be installed.
1. Install the IAC valve.
1
Position the IAC valve and gasket.
2
Install the bolts in two stages:
-
8-10 Nm (71-89 in lb)
-
10-11 Nm (89-95 in lb)
2. Connect the throttle bypass hose and the IAC electrical connector.