F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Starter Drive/Bendix: Testing and Inspection
Component Test
73 Digital Multimeter Or Equivalent
Alternator, Regulator, Battery And Starter Tester (ARBST) Or Equivalent
Special Tools
STARTER DRIVE TEST
1. Remove the starter motor.
2. Secure the starter motor in a vise.
3. Connect the battery ground cable of a fully charged battery to the case of the starter motor.
4. Touch the positive lead from the battery to the S-terminal and verify that the starter drive ejects.
CAUTION: Do not leave the positive lead of the battery connected to the starter motor S-terminal for more than ten seconds.
5. Remove the positive lead from the starter motor. The ejected starter drive should return to its original position.
6. If the starter drive does not eject and return to position, repair or replace the starter motor.
7. Check the starter drive. It should turn freely in one direction, and positively engage to the armature when turned in the opposite direction. If not as
specified, repair or replace the starter motor.