F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Starter Relay: Service and Repair
REMOVAL
WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT HEAVY GAUGE LEADS
ARE CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE PROTECTIVE CAPS ARE IN PLACE WHEN MAINTENANCE IS
COMPLETE.
1. Disconnect the battery ground cable.
2. Remove the relay cover.
3. Disconnect the starter motor solenoid relay switch wires and cables.
1
Remove the insulator.
2
Disconnect the ignition switch signal wire.
3
Remove the starter motor solenoid relay switch terminal nuts.
4
Remove the engine control sensor wire and the generator wire.
5
Remove the battery cables.