F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Accumulator: Service and Repair
1-2 Accumulator
REMOVAL
1. Use the (A) Servo Piston Remover Replacer to compress the 1-2 accumulator cover and remove the (B) accumulator piston retaining ring.
2. Remove the (A) 1-2 accumulator cover, the (B) 1-2 accumulator outer spring, the (C) accumulator piston and the (D) 1-2 accumulator inner spring
(model dependent).
NOTE:Note the location of the 1-2 accumulator outer spring for reference during assembly. Some models may use two 1-2 accumulator outer
springs. The accumulator piston may also vary with application.
INSTALLATION
1. Install the accumulator piston seal and lower accumulator seal onto the 1-2 accumulator piston.
2. Install the 1-2 accumulator assembly.
(1) Install the 1-2 accumulator inner spring (model dependent).
