F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Shift Cable: Adjustments
1. Place the gearshift lever in the OD position.
-
Place an eight pound weight on the gearshift lever.
2. Raise and support the vehicle.
WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
3. Disconnect the transmission shift cable from the manual lever.
4. Unlock the lock tab on the transmission shift cable.
5. Place the manual control lever in the OD position.
(1) Place the manual control lever in the first gear position.
(2) Move the manual control lever two detents to the OD position.
6. Connect the transmission shift cable to the manual control lever.
