ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Technical Service Bulletins: > < Transmission Speed Sensor, A/T|Specifications
Page 1
background image

Valve Body: Customer Interest
A/T - E4OD 4-1 Downshift During Forced 4-2 Downshift

Article No.
98-9-20

05/11/98

TRANSMISSION - E4OD - DOWNSHIFT DURING A 
FORCED 4-2 DOWNSHIFT BETWEEN 88-105 KM/H 
(55-65 MPH) - VEHICLES BUILT THROUGH 12/22/97

LIGHT TRUCK:
1997-98 ECONOLINE, EXPEDITION, F-150, F-250 LD 
1998 NAVIGATOR

ISSUE
Some vehicles may experience a 4-1 downshift when performing a forced 4-2 downshift (kickdown) between 88-105 km/h (55-65 mph) causing the
engine rpm to increase higher than expected. This may be caused by internal leakage of fluid between the hydraulic circuits in the transmission case
worm trail between the separator plate gasket and transmission case.

ACTION
Perform normal diagnostics as outlined in the appropriate Workshop Manual. If the concern is still present, replace the separator plate and gaskets. Refer
to the Application Chart below and the appropriate Workshop Manual for replacement procedures.

PART NUMBER

PART NAME

F8UZ-7A008-CA

Separator Plate

F81Z-7A008-EA

Separator Plate

F81Z-7C155-AA

Gasket

F81Z-7D100-AB

Gasket

OTHER APPLICABLE ARTICLES: 98-9-21 

WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage

OPERATION

DESCRIPTION

TIME

98O92OA

Replace Separator Plate

2.1 Hrs.

And Gasket

DEALER CODING

CONDITION

BASIC PART NO.

CODE

7A008, 7D100

42

OASIS CODES: 502000, 504000, 590000

All Technical Service Bulletins: > < Transmission Speed Sensor, A/T|Specifications