F 150 2WD Pickup V8-4.6L CNG SOHC VIN 9 (1997)
Windshield Washer Hose: Customer Interest
Windshield Washer Hose - Trapped By Hood
Article No.
96-22-10
10/21/96
WINDSHIELD WASHERS - WASHER HOSE TOO SHORT AND/OR IS TRAPPED BY THE HOOD - VEHICLES BUILT THROUGH 4/15/96
LIGHT TRUCK:
1997 F-150
ISSUE:
The windshield washer hose may be too short and/or may get trapped by the hood.
ACTION:
Relocate the washer hose to reduce the possibility of it getting trapped by the hood and to resolve the appearance issue caused by the short hose. Refer to
the following Service Procedure for details.
SERVICE PROCEDURE
1.
Remove the washer reservoir hose from the washer jet "tee" located on the underside of the hood.
2.
Remove the hose retaining clip and hose from the hood and retain for later use.
3.
Cut 415 mm (16.35") of the washer hose from the washer jet "tee" end. Refer to Figure 1.