F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
Lock Cylinder Switch: Service and Repair
REMOVAL
1. If equipped, twist the tilt wheel handle and shank and remove.
NOTE: Steering wheel shown removed for clarity.
2. Remove the lower steering column shroud.
1
Remove the lower steering column shroud screws.
2
Remove the lower steering column shroud.
3. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the ignition switch lock cylinder and turn to RUN position.
2
Push the (A) ignition switch lock cylinder release tab with a punch while pulling out the (B) ignition switch lock cylinder.