F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
5. Measure the front disc brake hub and rotor thickness.
-
Replace the front disc brake hub and rotor if not within specification.
6. If necessary, resurface the front disc brake rotor.
-
Ford recommends on-vehicle rotor machining. Follow lathe manufacturer's instructions.
7. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
8. Remove the disc brake anti-rattle clips.
1
Remove the pads.
2
Remove the disc brake anti-rattle clips.
INSTALLATION