F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
3. Separate the sensor cable from the brake hose clips.
4. Remove the (A) front brake anti-lock sensor bolt and the (B) front brake anti-lock sensor.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Rear
REMOVAL
1. Disconnect the battery ground cable.