F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
15. Position the timing chain/belt on the camshaft sprocket with the two copper chain links and the camshaft sprocket timing mark aligned.
CAUTION: The camshaft sprocket can jump if the Camshaft Holding Tool is not secured.
NOTE:
-
Be sure the copper chain link and crankshaft sprocket timing mark are aligned.
-
The lower half of the timing chain/belt must be positioned above the dowel.
16. Position the outer camshaft sprocket and the RH timing chain/belt with the long hub of the sprocket facing inward.
NOTE: If necessary, adjust the camshaft sprocket slightly to obtain timing mark alignment with the Camshaft Positioning Tool.
17. Position the RH timing chain/belt on the camshaft sprocket. Make sure the two copper-colored links align with the camshaft sprocket timing mark.