F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
9. Tighten the bolts in two steps, in the sequence shown.
Step 1: 2 Nm (18 in. lbs.)
Step 2: 20-30 Nm (15-22 ft. lbs.)
10. Position the throttle body onto the upper intake manifold and install the bolts.
11. Install the heater water hose and position the clamp.
12. Connect the water temperature indicator sender wiring.
13. Install the generator.
14. Install the drive belt.
