ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Left Side|Page 3385 > < Left Side|Page 3383
Page 1
background image

Exhaust Manifold: Service and Repair
Right Side

REMOVAL 

WARNING: THE ELECTRICAL POWER TO THE AIR SUSPENSION SYSTEM MUST BE SHUT OFF PRIOR TO HOISTING,
JACKING OR TOWING AN AIR SUSPENSION VEHICLE. THIS CAN BE ACCOMPLISHED BY TURNING OFF THE AIR
SUSPENSION SWITCH LOCATED IN THE RH KICK PANEL AREA. FAILURE TO DO SO MAY RESULT IN UNEXPECTED
INFLATION OR DEFLATION OF THE AIR SPRINGS WHICH MAY RESULT IN SHIFTING OF THE VEHICLE DURING THESE
OPERATIONS.
 

1. Raise and support the vehicle.
2. Remove the front fender splash shield.

3. Remove the three way catalytic converter to exhaust manifold nuts.

4. Remove the eight (A) nuts and the (B) exhaust manifold.

5. Remove and discard the exhaust manifold gasket.
6. Clean and inspect the exhaust manifold.

INSTALLATION 

Left Side|Page 3385 > < Left Side|Page 3383