F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
Ignition Cable: Service and Repair
REMOVAL
CAUTION: Spark plug wires must be connected to the proper ignition coil terminal and spark plug. Mark the spark plug wire locations.
NOTE: Procedure is the same for all spark plug wires; one is shown.
1. With a twisting, pulling motion, disconnect the spark plug wire from the spark plug.
2. Squeeze the (A) locking tabs and disconnect the (B) spark plug wire from the (C) ignition coil.
INSTALLATION
CAUTION: Spark plug wires must be connected to the proper ignition coil terminal and spark plug.
1. Apply Silicone Brake Caliper Grease and Dielectric Compound D7AZ-19A331-A meeting Ford specification ESE-M1C171-A or equivalent to the
inside of the spark plug wire boots.
2. Follow the removal procedure in reverse order.