F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
Engine Temperature Sensor: Description and Operation
The Cylinder Head Temperature (CHT) sensor:
-
is mounted into the wall of the cylinder head and is not connected to any coolant passages.
-
sends a signal to the powertrain control module indicating the cylinder head temperature.
- if the temperature exceeds 130°C (265°F), the powertrain control module disables four fuel injectors at a time. The powertrain control module
will alternate which four injectors are disabled every 32 engine cycles. The four cylinders that are not being fuel injected act as air pumps to aid in
cooling the engine.
-
if the temperature exceeds 166°C (330°F), the powertrain control module disables all of the fuel injectors until the engine temperature drops
below 153°C (308°F).
-
DTCs are set.
-
If the engine reaches critical temperature, the following happens:
- The coolant temperature gauge pointer will read fully hot at 121°C (250°F).
-
The check gauge warning indicator will illuminate.
