F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
Wheel Speed Sensor: Service and Repair
Toothed Ring
Front
REMOVAL
1. Remove the front disc brake rotor.
2. Use 2-3 Jaw Puller to remove the front brake anti-lock sensor indicator.
CAUTION: Discard the front brake anti-lock sensor indicator.
INSTALLATION
1. Install the new front brake anti-lock sensor indicator.
1
Position the front brake anti-lock sensor indicator.
2
Use an appropriate size cylinder and press to install the front brake anti-lock sensor indicator.
CAUTION: The front brake anti-lock sensor indicator must be pressed on straight.
2. Install the front disc brake rotor.
Rear
NOTE: The rear anti-lock brake sensor indicator is attached to the differential case. It is necessary to remove the ring gear in order to remove the rear
anti-lock sensor indicator.
Rear Antilock Brake System (RABS)
NOTE: The rear anti-lock brake sensor indicator is attached to the differential case. It is necessary to remove the ring gear in order to remove the rear
anti-lock sensor indicator.