F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
INSTALLATION
NOTE: This is not an ordinary installation procedure and does not compensate for band wear.
1. Install the reverse servo piston and return spring.
^
Do not install piston cover.
NOTE: Lubricate the reverse piston seal to facilitate assembly and prevent damage to the seal.
2. Install Servo Piston Selection Tool and tighten the band apply bolt.
3. Attach Dial Indicator With Bracketry.
^
Position the indicator stem on the flat portion of the reverse servo piston and zero the dial indicator.
4. Loosen the bolt until the piston stops against the tool.
