F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
5. Disconnect the clutch hydraulic line from the transmission using (A) Clutch Coupling Tool.
6. Lower the vehicle.
7. Remove the clutch master cylinder reservoir and clutch master cylinder.
-
Rotate the clutch master cylinder 45 degrees clockwise.
8. Clean all clutch master cylinder components.
CAUTION: Clean all rubber clutch master cylinder parts with Ford High Performance DOT 3 Motor Vehicle Brake Fluid C6AZ-19542-AB or
DOT 3 equivalent meeting Ford specification ESA-M6C25-A.
9. Inspect the clutch master cylinder for:
-
weak spring.
-
damage to any reservoir components.
-
damaged cups.
-
scored piston.
INSTALLATION
1. Lightly clamp clutch master cylinder reservoir in a vise.