F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
Pressure Plate: Service and Repair
Special Tools
REMOVAL
1. Remove the transmission.
2. If the parts are to be reused, mark the clutch pressure plate and flywheel.
3. Remove the clutch pressure plate and clutch disc.
1
Remove the bolts.
2
Remove the clutch pressure plate and clutch disc.
INSTALLATION
1. Compress the clutch diaphragm fingers.
1
Place (A) flywheel and (B) clutch pressure plate in a press.
2
Use a (C) suitable adapter and press the (D) clutch diaphragm fingers until the adjusting ring moves freely.
NOTE: Self adjusting clutch pressure plate should always be adjusted before installation.
