F 150 2WD Pickup V8-4.6L SOHC VIN W (1998)
5. Assemble the first and second gear assembly.
1
Install the second gear needle bearing.
2
Install the second gear.
3
Install the second synchronizer blocking ring.
4
Install the first/second synchronizer with the identification hole in the sleeve facing first gear.
5
Install the first gear synchronizer blocking ring.
6
Install first gear.
7
Install the first gear needle bearing.
8
Install the input bearing spacer.
9
Position the output shaft center bearing.
6. Use (A) Pinion Bearing Replacer, (B) Remover/Replacer Tube and (C) an arbor press to press the (D) center bearing into place.
7. Install the (D) third gear bearing, (C) third gear, (B) third gear synchronizer blocking ring and (A) third/forth synchronizer.
NOTE: Install the third/fourth synchronizer with the chamfer on the sleeve facing fourth gear.