F 150 2WD Pickup V8-4.6L VIN W (2006)
19. Release the seat cushion J-clips.
20. Remove the hog rings and the seat cushion trim cover.
21. Remove the hog rings and remove the foam pad from the seat cushion pan.
All seats
22. To assemble, reverse the disassembly procedure.
23. Install the seat and repower the SRS. Do not prove out the system at this time.
Passenger seat
24. CAUTION:
-
Make sure the seat is completely assembled before rezeroing.
-
The following precautions must be taken before rezeroing the OCS system:
-
Make sure the OCS system components are connected and no faults are present.
