F 150 2WD Pickup V8-4.6L VIN W (2006)
Removal
1. Remove the rear axle.
2. Remove the parking brake shoes.
3. Remove the 4 brake caliper support bracket nuts and bolts.
-
To install, tighten to 81 Nm (60 lb-ft).
4. If equipped, drill out the 2 rivets.
-
Protect the seal and bearings from chips.
-
It is not necessary to install new rivets.
5. Separate the brake disc shield from the brake caliper support bracket and the rear axle housing.
6. To install, reverse the removal procedure.
