F 150 2WD Pickup V8-4.6L VIN W (2006)
Parking Brake - Exploded View (Part 2)
Removal and Installation
1. Relieve the parking brake cable tension. For additional information, refer to Parking Brake Cable Tension Release.
2. Release the intermediate cable from the LH rear cable from the cable equalizer.
3. Release the front of the LH rear cable conduit at the frame bracket.
4. Remove and discard the double cable clamp.
5. Disconnect the LH rear parking brake cable from the rear parking brake levers and remove the cable from the vehicle.
6. To install, reverse the removal procedure.
^
Inspect the parking brake system for correct operation.
Parking Brake Cable - Rear, RH
Parking Brake Cable - Rear, RH