F 150 2WD Pickup V8-4.6L VIN W (2006)
Water Pump: Service and Repair
Coolant Pump - 4.61 (2V)
Material
Removal and Installation
1. Drain the engine cooling system.
2. Remove the cooling fan.
3. Remove the accessory drive belt.
4. Remove the bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Remove the bolts and the coolant pump.
^
To install, tighten to 25 Nm (18 ft. lbs.).
6. Remove and discard the O-ring seal.
7. Clean the O-ring seal mating surface with metal surface prep. Follow the directions on the packaging.
