F 150 2WD Pickup V8-4.6L VIN W (2006)
6. NOTE: Rotate the steering column so the pinch bolt for the steering column coupling allows clearance for the isolator bolt.
Remove the upper front axle carrier mounting bushing bolt.
7. Remove the axle shaft housing carrier bushing bolt.
8. Remove the lower front axle carrier mounting bushing bolt.
9. Partially lower the front axle assembly.
All vehicles
10. CAUTION: Do not use metal scrapers, wire brushes, power abrasive discs or other abrasive means to clean the sealing surfaces. These may cause
scratches and gouges resulting in leak paths. Use a plastic scraper to clean the sealing surfaces.
Remove the 16 oil pan bolts and the oil pan, discard the oil pan gasket. Clean the sealing surfaces with silicone gasket remover and metal surface
prep. Follow the directions on the packaging. Inspect the mating surfaces.
Installation
All vehicles