F 150 2WD Pickup V8-4.6L VIN W (2006)
7. Rotate the tensioner clockwise and remove the drive belt.
8. CAUTION: This bolt is torque-to-yield and cannot be reused.
Using the special tool, remove the bolt and washer and discard the bolt.
9. Using the special tool, remove the crankshaft pulley.
10. Using the special tool, remove and discard the crankshaft front seal.
11. Remove the 4 coolant pump pulley bolts and the coolant pump pulley.
12. Remove the bolt and the accessory drive belt idler pulley.
