F 150 2WD Pickup V8-4.6L VIN W (2006)
4. Tighten the engine front cover fasteners in the sequence shown to 25 Nm (18 lb-ft.
5. Loosely install the bolts, then tighten the bolts in 2 stages, in the sequence shown.
^
Stage 1: Tighten to 20 Nm (15 ft. lbs.).
^
Stage 2: Tighten an additional 60 degrees.
6. If equipped, install the transmission cooler tube support bracket and nut.
^
Tighten to 10 Nm (89 inch lbs.).