F 150 2WD Pickup V8-4.6L VIN W (2006)
7. Install the A/C manifold and tube assembly support bracket and nut.
^
Tighten to 10 Nm (89 inch lbs.).
8. Connect the CKP sensor electrical connector.
9. Position the RH radio interference capacitor and install the nut.
^
Tighten to 10 Nm (89 inch lbs.).
10. Position the upper radiator hose bracket and install the nut.
^
Tighten to 10 Nm (89 inch lbs.).
11. Position the LH radio interference capacitor and install the nut.
^
Tighten to 10 Nm (89 inch lbs.).
12. Install the CMP sensor and the bolt.
^
Tighten to 10 Nm (89 inch lbs.).
13. Connect the CMP sensor electrical connector.
14. Position the power steering pump and install the bolts.
^
Tighten to 25 Nm (18 ft. lbs.).
