F 150 2WD Pickup V8-4.6L VIN W (2006)
5. Turn the ignition OFF.
6. WARNING: To avoid accidental deployment and possible personal injury, the backup power supply must be depleted before repairing
or replacing any front or side air bag supplemental restraint system (SRS) components and before servicing, replacing, adjusting or
striking components near the front or side air bag sensors, such as doors, instrument panel, console, door latches, strikers, seats and hood
latches.
To deplete the backup power supply energy, disconnect the battery ground cable and wait at least one minute. Be sure to disconnect
auxiliary batteries and power supplies (if equipped).
Disconnect the battery ground cable and wait at least one minute.
7. Remove the 2 steering wheel back cover plugs (1 shown).
8. Remove the 2 driver air bag module bolts (1 shown).
9. Remove the driver air bag module.
1
Release the 2 retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
2
Release the 2 retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
3
Disconnect the 2 electrical connectors (1 shown).
4
Remove the driver air bag module.
