F 150 2WD Pickup V8-4.6L VIN W (2006)
Seals and Gaskets: Service and Repair
Extension Housing Gasket
Extension Housing Gasket
Materials
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist.
4x2 vehicles
2. NOTE: To maintain initial driveshaft balance, mark the rear driveshaft yoke and axle flange so they may be installed in their original positions.
Mark the driveshaft flange and the rear pinion flange for correct alignment during assembly.
3. Remove the 4 rear driveshaft bolts.
4x4 vehicles
4. Remove the transfer case.
All vehicles
5. Using a suitable high-lift Jack to support the transmission.
