F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
Antenna Cable: Service and Repair
REMOVAL
1. On 4x4 vehicles, remove the front wheel opening moulding.
1
Remove the pushpin.
2
Remove the screws.
3
Carefully pry the wheel opening moulding to release the nine clips and remove the front wheel opening moulding.
2. Remove the inner splash shield.
1
Remove the screws.
2
Pull the inner fender splash shield to release the clips and remove the inner splash shield.
3. Disconnect the radio antenna lead in cable from the antenna base.
4. Remove the radio chassis.
