F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
37.
Install right and left timing chain tensioners. Tighten retainers to 20-30 Nm (15-20 lb-ft).
38.
Remove paper clips from both timing chain tensioners.
39.
Remove both camshaft holding tools.
40.
Install crankshaft sensor ring.
41.
Install engine front cover as follows:
NOTE:
The engine front cover must be installed within four (4) minutes after applying silicone. Apply Silicone Gasket and Sealant F6AZ-1 9562-AA or
equivalent, along head to block surface and oil pan to block surface. See Figure 62.
^
Using new gasket, install engine front cover. Align cover with cylinder block dowel.
^
Loosely install engine front cover bolts and stud bolts.
