ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Campaign - Coolant/Cylinder Head Replacement|Page 2754 > < Campaign - Coolant/Cylinder Head Replacement|Page 2752
Page 51
background image

67.

Install right side cam cover. Tighten retainers in sequences shown in Figures 69 and 70, to 8-12 Nm (71-107 lb-in).

NOTE:

The cam cover must be installed within four (4) minutes after applying silicone.

68.

Apply Silicone Gasket and Sealant F6AZ-19562-AA or equivalent, to the two (2) places where the engine front cover meets the cylinder head.

Campaign - Coolant/Cylinder Head Replacement|Page 2754 > < Campaign - Coolant/Cylinder Head Replacement|Page 2752