F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
6. Remove the fan blade assembly and fan clutch.
1
Use the fan clutch holding tool to hold the water pump pulley steady.
2
Use the fan clutch wrench to remove the fan blade and the fan clutch.
NOTE: The fan clutch has LH threads.
7. Remove the fan shroud.
1
Remove the screws.
2
Lift and remove the fan shroud.
8. Remove the fan blade and fan shroud out of the vehicle together.
9. Separate the fan clutch from the fan blade assembly.
1
Remove the bolts.
2
Separate the (A) fan blade assembly from the (B) fan clutch.
INSTALLATION
