F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
7. Loosely install the Camshaft Holding Tools on both camshafts.
8. Install the timing chain guides.
9. Slightly loosen the camshaft holding tools to allow slight camshaft movement. Rotate the LH camshaft with the Camshaft Positioning Tool until
the timing mark is approximately at 12 o'clock. Rotate the RH camshaft with the Camshaft Positioning Tool until the timing mark is approximately
at 11 o'clock. Tighten the Camshaft Holding Tools to maintain camshaft pre-positioning.
CAUTION: Do not turn the engine over with the camshaft positioning tool or damage to the camshaft sprocket or the bolt may occur.
