F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
1. Apply a bead of silicone in two places where the engine front cover meets the cylinder head.
-
Use Silicone Gasket and Sealer F6AZ-19562-AA or equivalent meeting Ford specification WSE-M4G323-A6.
2. Position the (A) valve cover and the valve cover gasket on the (B) cylinder head, and loosely install the bolts.
3. Tighten the bolts in the sequence shown.
4. Position the fuel charging wiring onto the valve cover studs.
