F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
19. Connect the EGR valve to exhaust manifold tube upper fitting.
1
Tighten both fittings starting at the top in three steps.
-
Hand tighten.
-
Tighten the upper fitting to 35-45 Nm (26-33 ft. lbs.).
-
Tighten the lower fitting to 55-65 Nm (41-47 ft. lbs.).
20. Connect the Following electrical connectors:
-
idle air control valve (IAC)
-
DPFE transducer
-
Engine Vacuum regulator sensor
21. Connect the fuel lines.
22. Position the brake booster vacuum hose bracket and install the nut.
