F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
Key Reminder Switch: Service and Repair
KEY IN IGNITION WARNING SWITCH
REMOVAL
1. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Insert a punch in the access hole of the steering column and press the release tab while pulling out the ignition switch lock cylinder.
2. Remove the key in ignition warning switch.
1
Pry the clip downward.
2
Release the key-in-ignition warning switch from the rear of the ignition switch lock cylinder.
INSTALLATION
