F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
Fog/Driving Lamp Bulb: Service and Repair
REMOVAL
WARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS
SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB CAREFULLY. GRASP THE BULB ONLY BY ITS BASE. AVOID
TOUCHING THE GLASS ENVELOPE.
NOTE: The fog lamp bulb should not be removed from the fog lamp until just before a replacement bulb is installed. Removing the bulb for an
extended period of time may affect fog lamp bulb performance. Contaminants may enter the fog lamp where they can settle on the lens and reflector.
Never turn on the fog lamps with the bulb removed from the fog lamp.
1. Disconnect the battery ground cable.
2. Disconnect the fog lamp bulb electrical connector.
3. Rotate the fog lamp socket counterclockwise and remove.
INSTALLATION
WARNING: THE HALOGEN BULB CONTAINS GAS UNDER PRESSURE. THE BULB MAY SHATTER IF THE GLASS ENVELOPE IS
SCRATCHED OR IF THE BULB IS DROPPED. HANDLE THE BULB CAREFULLY. GRASP THE BULB ONLY BY ITS BASE. AVOID
TOUCHING THE GLASS ENVELOPE.
NOTE:
^
The fog lamp bulb should not be removed from the fog lamp until just before a replacement bulb is installed. Removing the bulb for an extended
period of time may affect fog lamp bulb performance. Contaminants may enter the fog lamp where they can settle on the lens and reflector. Never
turn on the fog lamps with the bulb removed from the fog lamp.
^
When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The
