F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
Alignment: Service and Repair
Caster and Camber
1. Remove the alignment plate.
(1) Remove the nuts.
(2) Remove the alignment plate.
2. Install the washers and nuts.
3. To increase caster and camber, use the following steps:
(1) To increase caster, move the front of the upper control arm outboard and move the rear or the upper control arm inboard.
(2) To increase camber, move the upper control arm outboard equally.
NOTE: A pry bar can be used between the upper control arm and the frame pocket to aid in moving the arm.
