ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Campaign - Coolant/Cylinder Head Replacement|Page 1291 > < Campaign - Coolant/Cylinder Head Replacement|Page 1289
Page 13
background image

20.

Drain engine oil. Do not final tighten drain plug at this time, as it will be removed again.

21.

Lower vehicle.

NOTE:

The best access to the A/C electrical connector is through the wheel well.

22.

On 4X4 models, disconnect A/C clutch electrical connector.

23.

Mark and disconnect DPFE transducer hoses from EGR tube.

24.

Disconnect EGR tube from EGR valve, then remove EGR tube from vehicle.

25.

On 4.6L engines, proceed as follows:

^

Remove power steering reservoir bracket retainers, then position reservoir assembly aside. See Figure 8.

^

Disconnect crankcase vent tube from left cam cover. Remove vent tube from vehicle.

Campaign - Coolant/Cylinder Head Replacement|Page 1291 > < Campaign - Coolant/Cylinder Head Replacement|Page 1289