ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Electronic Noise Suppressor|Service and Repair|Page 6769 > < Electronic Noise Suppressor|Service and Repair
Page 2
background image

4. Remove the LH and RH windshield side garnish mouldings (03598).

5. Remove the safety belt guide bolt.

1. Lift the bolt cover.
2. Remove the safety belt guide bolt.

6. Remove the roof side rear trim panel.

1. Remove the pushpin.
2. Pry and release the clips.
3. Slide the roof side trim panel out of the four retainers and remove the roof side trim panel.

7. Remove the coat hooks.

1. Remove the two screws.
2. Remove the two coat hooks.

Electronic Noise Suppressor|Service and Repair|Page 6769 > < Electronic Noise Suppressor|Service and Repair