F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
2. Adjust the clutch pressure plate.
^
Rotate (A) adjusting ring counterclockwise until the (B) tension springs are compressed.
^
Hold (A) adjusting ring while releasing the pressure on the clutch fingers.
3. Position the (A) clutch disc on the (B) flywheel.
^
Use (C) Clutch Aligner to align the clutch disc.
4. Position the clutch pressure plate on three dowels.
1
Align the clutch pressure plate.
^
Install the clutch pressure plate bolts.
2
Remove Clutch Aligner.
NOTE: If reusing clutch pressure plate and flywheel use marks made during removal.
5. Install the transmission.
6. Operate vehicle to check clutch operation.