F 150 2WD Pickup V8-5.4L Prop SOHC VIN Z (1998)
REMOVAL
1. Remove the front safety belt guide nut
1. Lift cover from the bottom
2. Remove the front safety belt guide nut
2. NOTE: Regular Cab Shown, Super Cab similar. Remove the upper corner trim panel.
1. Remove the pushpin.
2. Pry to release the three clips.
3. Slide the upper corner trim panel out of the four retainers and remove the upper comer trim panel.
3. Remove the height adjuster cover.
4. Remove the shoulder safety belt height adjuster.
1
Use Safety Belt Bolt Bit to remove the two bolts.
2
Remove the shoulder safety belt height adjuster.
