ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

Driver Side - Front and Rear|Page 8047 > < Dual Locking Mode Retractor|Page 8044
Page 1
background image

Seat Belt Retractor: Service and Repair
Driver Side - Front and Rear

Safety Belt Bolt Bit

T55 "Torx Plus" Bit

Special Tool(s)

REMOVAL

1. Remove the safety belt guide nut.

1. Lift the D-ring cover from the bottom. 
2. Remove the safety belt guide nut.

2. On SuperCab vehicles, remove the rear safety belt guide bolt.

1. Lift the D-ring cover from the bottom.
2. Use Safety Belt Bolt Bit to remove the rear safety belt guide bolt.

3. Remove the upper and lower rear comer trim panels.

Driver Side - Front and Rear|Page 8047 > < Dual Locking Mode Retractor|Page 8044